11/06/2006

1. Product and Company identification

Production Name:	Green Glue	Company & Emergency contact:
Product Type:	Water based damping adhesive	Green Glue Company 710 11th Ave NE West Fargo, ND 58078 866-435-8893
24 hours a day:	CHEMTREC 1-800-424-9300.

02. Composition, Information on Ingredients

Before using, Handing, or Exposure to these ingredients, read and understand the MSDS.


Name:	CAS number:	Percent by weight:
Latex polymer	Not available	25-60%
Water	7732-18-5	30-60%
This product does not contain hazardous or carcinogenic components Reportable under OSHA Hazard Communication Standard 1910.1200

03. Hazards Identification


3.1 Emergency Overview
Appearance:	Thin, light green paste
Odor:	Slight characteristic latex to no odor
Fire Hazard	Not a Significant fire Hazard

HMIS Rating


Emergency Overview
Health:	1 (slight)
Flammability:	0 (minimal)
Chronic:	0 (minimal)

03.2 Potential Health Effects


Immediate Hazards
Ingestion:	Potential irritant, do not ingest
Inhalation:	Not expected to be harmful under normal conditions of use. If allowed to become airborne, may cause irritation of nose, throat and lungs.
Skin:	May cause irritation on prolonged or repeated contact or if allowed to dry on skin, brief contact is not shown to cause irritation.
Eyes:	May cause irritation

03.3 Delayed Hazards

None known to company

04. First Aid Measures Immediate Hazards


Immediate Hazards
Ingestion:	If accidentally swallowed, dilute by drinking large quantities of water. Immediately contact poison control center or hospital emergency room for any other additional treatment directions.
Inhalation:	Remove to fresh air.
Skin:	In case of contact, flush with water and wash until clean. If material is noticed on skin before dry, wash prior to material drying if at all possible.
Eyes:	Immediately flush eyes with plenty of water. Call a physician if irritation persists.

05. Fire Fighting Measures


Name:	Description:
Auto ignition Temperature:	Not available
Upper/Lower Flammable Limits:	Not available
Up/Lower Explosive Limits, % by Vol:	Not available
Flash Point:	Not available
Material is incombustible as supplied, but dried material will support combustion. In case of fire, water should be used to keep fire-exposed containers cool.

06. Accidental Release Measures

Soak up with absorbent material and remove to a chemical disposal area. Prevent entry into natural bodies of water.

07. Handling and Storage

07.1 Handling

Handle in accordance with good industrial hygiene and safety practices. These practices include avoiding unnecessary exposure and removal of the material from eyes, skin and clothing. Wash thoroughly after handling. Always use appropriate Personal Protective Equipment (PPE).

07.2 Storage

Keeping from freezing.
Store in a cool, dry place.
Keep containers tightly closed.

08. Exposure Controls/Personal Protection

08.1 Exposure Controls

Exposure Limits: None Established

08.2 Personal Protection

Inhalation:	Inhalation is not anticipated to be a route of exposure in normal use. If the product is to become airborne use NIOSH/MSHA approvedrespiratory protection equipment.
Skin:	Wear latex or other water-impermeable gloves. Wear coveralls to prevent skin contact.
Eye:	Wear safety glasses

09. Physical and Chemical Properties

Percent Volatiles: 25-40
pH @ 25 C: 7-10
Specific Gravity: 1.03-1.08
Appearance: Light green colored thin paste
Autoignition Temperature: Not applicable
Boiling Point: 100 deg C
Vapor Density (Air=1): < 1
Vapor Pressure: mm Hg @ 20 C
Evaporation Rate (Butyl Acetate=1): < 1
Upper/Lower Flammable Limits: Not applicable
Up/Lower Explosive Limits, % by Vol: Not applicable
Flash Point: Not applicable
Freezing Point: 0 deg C
Odor Threshold, ppm: Not applicable
Solubility in Water: Dispersible with stirring

10. Stability and Reactivity

Stability & Reactivity: Stable
Incompatibles: Strong acids and alkaline materials (may cause gellation).
Decomposition Products may include: CO, CO2
Hazardous Polymerization: Will not occur.
Other Hazards: None known

11. Toxicological Informations

Chronic/Carcinogenicity: no
LD50: Not available

12. Ecological Information

Not Determined
Information on analogous products implies that this product will not be toxic to fish or plants. Polymer is not biodegradable.

13. Disposal Considerations

Dispose in accordance with applicable federal, state and local government regulations.

14. Transport Information

Not Regulated

15. Regulatory Information (Selected Regulations)

15.1 U.S. Federal Regulations:

Canadian Regulatory Information: This product is not classified as hazardous under WHMIS.
VOC: <5 gram per liter (calculated)

TSCA Section 8(b) Inventory

All reportable chemical substances are listed on the TSCA Inventory or is governedby CFR (Code Federal Regulation) section 40 CFR 723.250, “Benign exemption”, exempting it from mandate of TSCA registry. We rely on statements of compliance from our suppliers.

16. Other Information

User’s Responsibility
The OSHA Hazard Communication Standard 29CFR 1910.1200 and the Workplace Hazardous Materials Information System (WHMIS) require that the information contained on these sheets be made available to your workers. Trained, educated workers are your companies’ greatest safety asset.

Disclaimer

SSELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, CONCERNING THE PRODUCT OR THE MER-CHANTABILITY OR FITNESS THEREOF FOR ANY PURPOSE, except that the product shall conform to contracted specifications, and that the product does not infringe any valid United States or Canadian patent. All claims shall be limited to purchase price only. Seller is liable in no event for incidental or consequential damages, whether Buyer’s claim is based on contract, breach of warranty, negligence or otherwise. Seller certifies only that the information in this sheet is, to the limits of their knowledge, accurate. Seller relies to some extent on supplier data and is not responsible for errors contained therein.

These documents may also be of aid:

1. The impact of using Green Glue - How quickly can Green Glue decay vibration over distance?

2. Using Green Glue - This document takes a look at how to best utilize Green Glue in walls, floors, and ceilings.

3. Green Glue Instructions - Using Green Glue is a straight forward process

4. Green Glue Datasheet - Green Glue has unprecedented damping factors in real-world installation conditions

5. MSDS - Material Safety Data Sheet

6. Green Glue Flame Test - Two different indenpendent lab results

7. Green Glue Moisture Test - Moisture test preformed D4 Laboratories

8. Green Glue Mold Test - Analytical report preformed Northeast Laboratory Service

9. Third Party Lab Results - Independent third party transmission loss reports

Green Glue Material Safety Data Sheet